Laboratory plate and epoxy resin board: 环氧树脂板:
Epoxy resin board: 1、常见的方法是在工作前后用70%浓度的乙醇清洁台面。 The most common approach is to use a 70% concentration of ethanol on the table before and after work. 2、如果只是去除表面的脏东西，用湿布就可以了；如果这些脏东西较难擦拭，则建议使用家用的清洁剂，但不能使用带磨料的清洁剂，也不能打蜡。 If you just remove the dirt from the surface, you can use a wet cloth. If these dirty things are more difficult to wipe, it is recommended to use household cleanser, but can not use the cleanser with abrasive, also can not waxing. 3、由金属、橡胶及类似物体导致的油渍划痕可用蘸满石脑油或溶剂的布来擦拭。 Oil stained by metal, rubber and similar objects can be cleaned by a cloth dipped in naphtha or solvent. 4、定期用纸巾或干净的抹布蘸取CrystalSimpleGreen产品进行清洁、擦亮，也可使用光亮油进行清洁与光亮。 Regularly use a paper towel or a clean cloth to remove the CrystalSimpleGreen product to clean, polish, and use bright oil to clean and shine. 5、如果想恢复台面板原有的光泽，可用蘸满油的布擦拭表面，再用干布擦干。 If you want to restore the original gloss of the panel, wipe the surface with a cloth filled with oil and dry with dry cloth. 抗化板:
Resistant plate: 1、请勿将此材料长期放置在温度超过135度的环境下。 Do not keep this material in a temperature over 135 degrees for a long time. 2、请勿将此材料暴露于明火、熔融金属、金属火花或只设阳光下，也不能用作切剁的表面。 Do not expose this material to open flame, molten metal, metal spark or sunlight, nor can it be used as a cutting surface. 3、煤汽灯或酒精灯的火焰会损坏本产品的表面，故酒精灯或煤汽灯须置于三角架上使用。 The flame of a coal burner or an alcohol lamp can damage the surface of the product, so an alcohol lamp or a coal lamp must be put on a tripod. 4、通风柜理化板表面建议采用温水、丙西酮或性质温和的清洁剂清洗，可选用用来洗手或洗碗的清洁剂，不要选用有磨料、强酸成份的清洁剂以免损伤表面，对于顽固的污渍，可将次氧酸滴于污染的理化板表面后用清水洗净。 4, fume hood, the warm water, the physical and chemical plate surface recommended c west ketone or mild detergent to clean, can choose to or dishwashing detergent to wash your hands, don't choose to have cleaner so as not to damage the surface of abrasive, acid ingredients, for stubborn stains, acid drops in pollution can be lowered oxygen with clean water after physical and chemical plate surface. 我们一直以质量，顾客至上，作为我们的服务宗旨，尽我们大的努力来为您提供满意的服务，我们真诚的欢迎您来本公司视察，选购，希望我们有良好的合作机会，共同创造双赢的局面！ We have been to the quality first, customer first, as our service tenet, do our best to provide you with satisfactory service, we sincerely welcome you to our company visit, the choose and buy, hope we have good cooperation opportunity, together create a win-win situation!